As an Amazon Associate I earn from qualifying purchases.
Dryer Dock #ad - Easy maintenance - dryer dock is a two-piece “quick release System” that enables quick access to your dryer vent hose and vent pipe, allowing for easy removal and cleaning. This unique solution is easy to install, looks great when installed, saves space behind the dryer, and makes maintenance a snap.
Dryerdock quick-connect - it is the easiest way to connect your dryer's vent to your house vent. Keeping the vent clean, saves energy, and prevents dryer fires. Eliminates environmental intrusion - made of rigid abS plastic and fastens together with a slight twist, pest intrusion, saves energy, the rigid design keeps the hose securely in place, eliminates air drafts, wear and tear on both dryer and clothes.
Prevents fires - according to the national fire protection association, 380 injuries, 000 home dryer fires are reported each year, causing around 51 deaths, dryer vent fires are the number one cause of household fires, nearly 17, and $236 million in property loss. Fits 4" tubes with a 6" flange. Dryer dock is the “gold standard” of quick release in the industry for home and commercial applications, factories, and offices.
JSP Manufacturing #ad - Quantity: 1 ~ color: white ~ made in usa! convenient dryer maintenance and overall safety - provides a simple, easy and quick access point to the dryer duct for cleaning of lint and debris on a regular basis.
Poweka #ad - Fixes the following symptoms :Leaking | Not dispensing water. Quick connector for plastic water line - 5/16" to 5/16". Quick connect fittings size: 8mm to 8mm; material: plastic. Part number wr02x11330 replaces: 963908, ap3414915, wr02x10471, WR2X11330.
Kraftex #ad - Our dryer to duct connector can be applied to homes, garages, cellars, offices & more. This is a premium quality material known to be tough & resistant to extreme temperatures too. We truly believe our 4 inch Duct Connector is the best in the marketplace and we stand by that.
Quick installation – our 4in duct collar has pre-bored mounting holes for a quick & easy installation. Used to connect your duct hose to an output port. Secure fit – through using our plastic flanges, we’ll fully refund you. So, you can expect an air-tight seal to prevent any cold or hot air entering your home, resulting in lower energy costs.
Wide application – our duct flange to wall Dryer Vent is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan & many other indoor/outdoor ventilation systems. Screws are not included. Premium quality – here is our new black 4 inch duct plastic connector Flange for heating & cooling ventilation systems. Our dryer duct to wall connector will last you a lifetime. Mount our 4in wall vent to any surface with 4 x M3/M3. 5 screws, then slide duct hose over dryer vent wall connector to clamp in place.
PURENAT #ad - Prime quality accessories：The accessories in our kit are extremely safe and durable, there is no need to consider replacement for several years. Easy installation：the fittings in the water line kit are standard and Push-in quick connect, no additional tools required.
Widely compatibility：our water line kit is suitable for connecting most standard under sink filtration system or reverse osmosis systems 1/4"or 3/8" Outlet to refrigerator, ice maker, water dispenser and more.
Ensure you and your family enjoy crystal ice cubes and delicious pure water. Include all parts you need：25 ft 1/4" od tubing, and a compression fitting set 2 insert, a 3/8" x 1/4" x 3/8" tee for 3/8" outlet water filters, 1/4" straight fitting, a 1/4" x 1/4" x 1/4" tee（for 1/4" outlet water filters）, a 1/4" adapter, 2 sleeve, a 1/4" shut off valve, 1 nut.
Malida #ad - Malida fittings & tubing for quick & easy installation by hand with no tools needed. Connects ro systems to refrigerator ice makers for ultrapure water superior to fridge filters. Works with most reverse osmosis and water filter systems using 1/4 inch standard tubing.
Cen-Tec Systems #ad - Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. Adapter set is only compatible with 1-1/4" threaded crushproof hose is not compatible with included blow molded hose that ships standard with most brands of shop vacuums.
Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Cobalt, Festool, Porter Cable, Makita, Fein, Ryobi, Dewalt, Hitachi, and Milwaukee Electric. Expanded adapter set includes 3/4" 1" 1-1/4" 1-1/2" Power Tool shroud fittings.
A collar with clip ring and bayonet fittings with ¾” 1” 1-1/4” 1-½” soft tpe fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
Beaquicy #ad - Easy to install: snap the hose onto the connector, place the seal ring on the wall or dryer duct and simply push hose with connector onto duct. Premium quality: our sturdy elbow connectors make setup simple and one-time projects.
Package includes: stv-90 dryer vent connector includes one snap to vent 90 elbow, one snap connector and one seal ring to connect to the wall duct or dryer duct. This 5. 5 in. Diameter 90 degree elbow dryer connector is made to connect a semi rigid or flexible dryer hose with no hose clamps necessary.
Our company attaches great importance to the shopping experience of each customer. Save your money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. H x 4. 25 in. L x 6 in. If you have any questions during shopping, please contact customer service in time. This means your clothes get dryer faster and you save electricity bills.
1. Dryer Dock
#adFits 4 Inch Tubes, Twist & Lock Tight, Dryer Dock The Original Dryer Vent Quick Release, Two-Piece Dryer Hose Quick-Connect
#adDryerdock quick-connect - it is the easiest way to connect your dryer's vent to your house vent. Keeping the vent clean, saves energy, and prevents dryer fires. Eliminates environmental intrusion - made of rigid abS plastic and fastens together with a slight twist, pest intrusion, saves energy, the rigid design keeps the hose securely in place, eliminates air drafts, wear and tear on both dryer and clothes.
More information #ad
Proudly made in the USA. The original dryer dock - patented under usp # 6, it is installed in more than 500, 000 homes, 131, 958. Prevents fires - according to the national fire protection association, 380 injuries, 000 home dryer fires are reported each year, causing around 51 deaths, dryer vent fires are the number one cause of household fires, nearly 17, and $236 million in property loss. Fits 4" tubes with a 6" flange. Dryer dock is the “gold standard” of quick release in the industry for home and commercial applications, factories, and offices.
| Brand | Dryer Dock #ad |
| Manufacturer | Ventpro Inc #ad |
| Height | 6 Inches |
| Length | 3 Inches |
| Weight | 0.3 Pounds |
| Width | 6 Inches |
| Part Number | 5000-1 |
| Model | 5000-1 |
More information #ad
2. JSP Manufacturing
#adWHITE DRYER DUCT TO WALL CONNECTOR QUICK CONNECT FOR DRYER VENT 6" FOR 4" TUBES… 1 Pack
#adMore information #ad
Does not include mounting hardware or Vent hoses ~ Easy Two-piece assembly – See images for instructions. Compatible with 4” dryer duct hose ~ Overall Diameter measures approximately: 6". New aftermarket Quick Dryer Duct Vent Wall Connector.| Brand | JSP Manufacturing #ad |
| Manufacturer | JSP Manufacturing #ad |
| Part Number | AP-Vent |
| Model | AP-Vent |
More information #ad
3. Poweka
#ad5/16" to 5/16" Refrigerator Water Line Tube Connector Unit Compatible with GE Replace WR02X11330
#adMore information #ad
The part /product is not sponsored or endorsed by, including General Electric, Hotpoint. Works with the following brands :compatible with General Electric, or affiliated with the brands it fit, Hotpoint.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
| Part Number | 0194 |
More information #ad
4. Kraftex
#adCooling and Heating. Small Through The Wall Trim Collar Ducting with Mounting Plate Quick Connect, Dryer Vent Wall Plate 4 Inch, Black Plastic Duct Connector Flange for Ventilation Straight Pipe
#adQuick installation – our 4in duct collar has pre-bored mounting holes for a quick & easy installation. Used to connect your duct hose to an output port. Secure fit – through using our plastic flanges, we’ll fully refund you. So, you can expect an air-tight seal to prevent any cold or hot air entering your home, resulting in lower energy costs.
More information #ad
Tough & durable – our 4in flange connector has been made from ABS Plastic. If you do not feel connected to our Duct Wall Connector, click “Add to Cart” now and buy with confidence. Wide application – our duct flange to wall Dryer Vent is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan & many other indoor/outdoor ventilation systems. Screws are not included. Premium quality – here is our new black 4 inch duct plastic connector Flange for heating & cooling ventilation systems. Our dryer duct to wall connector will last you a lifetime. Mount our 4in wall vent to any surface with 4 x M3/M3. 5 screws, then slide duct hose over dryer vent wall connector to clamp in place.
| Brand | Kraftex #ad |
| Manufacturer | Kraftex #ad |
More information #ad
5. LG
#adLG Electronics 5210JA3004K 5/16-Inch Refrigerator Plastic Tubing
#adLG #ad - Refrigerator plastic tubing. Lg electronics part number 5210JA3004K. Refer to your manual to ensure ordering the correct, compatible part. White plastic. 5/16-inch diameter.More information #ad
| Brand | LG #ad |
| Manufacturer | LG Electronics #ad |
| Height | 4 Inches |
| Length | 12 Inches |
| Weight | 0.19 Pounds |
| Width | 4 Inches |
| Part Number | 5210JA3004K |
| Model | 5210JA3004K |
More information #ad
6. PURENAT
#adIce Maker Water Line Kit, Food Grade Refrigerator/Fridge Water Tubing Installation Kit,1/4 In O.D. 25 FT Water Line with Quick Fittings,For Adding a branch waterway on RO Systems1/4"or 3/8" Outlet
#adWidely compatibility：our water line kit is suitable for connecting most standard under sink filtration system or reverse osmosis systems 1/4"or 3/8" Outlet to refrigerator, ice maker, water dispenser and more.
More information #ad
Also a clear installation instructions help you complete your work in minutes. Safe material：our ice maker water line kit is made by food grade materials, have tested to meet NSF/ANSI standards and BPA free. Ensure you and your family enjoy crystal ice cubes and delicious pure water. Include all parts you need：25 ft 1/4" od tubing, and a compression fitting set 2 insert, a 3/8" x 1/4" x 3/8" tee for 3/8" outlet water filters, 1/4" straight fitting, a 1/4" x 1/4" x 1/4" tee（for 1/4" outlet water filters）, a 1/4" adapter, 2 sleeve, a 1/4" shut off valve, 1 nut.
| Brand | PURENAT #ad |
| Manufacturer | PURENAT #ad |
More information #ad
7. Malida
#adMalida RO Water Systems Ice Maker Kit 1/4" for Reverse Osmosis Systems and Water Filters blue
#adMore information #ad
Njoy clear, sparkling & delicious ice cubes and ro water at your fridge dispenser. Includes 16-feet length of 1/4 inch tubing OD, 1 quick-connect T fitting & 1 quick-connect shut-off ball valve.| Brand | Malida #ad |
| Part Number | COMIN18JU092495 |
| Model | COMIN18JU092495 |
More information #ad
8. Cen-Tec Systems
#adCen-Tec Systems 95237 Quick Click Expanded Multi-Brand Power Tool Adapter Set for Dust Collection, Black
#adDesigned to fit most major brands of power tools and work shrouds including Skill Bosch, Cobalt, Festool, Porter Cable, Makita, Fein, Ryobi, Dewalt, Hitachi, and Milwaukee Electric. Expanded adapter set includes 3/4" 1" 1-1/4" 1-1/2" Power Tool shroud fittings.
More information #ad
Compatible with the following cen-tec adapters and hoses 94511, 95204, 94434, 94522, 95193, 95215. Set is antistatic, providing a shock free environment to grounded vacuums and hoses. The soft tpe of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool. A collar with clip ring and bayonet fittings with ¾” 1” 1-1/4” 1-½” soft tpe fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
| Brand | Cen-Tec Systems #ad |
| Manufacturer | Cen-Tec Systems #ad |
| Height | 4 Inches |
| Length | 8 Inches |
| Width | 6 Inches |
| Part Number | 95237 |
| Model | 95237 |
More information #ad
9. Beaquicy
#adBeaquicy STV-90 Dryer Duct Connector, Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit
#adPackage includes: stv-90 dryer vent connector includes one snap to vent 90 elbow, one snap connector and one seal ring to connect to the wall duct or dryer duct. This 5. 5 in. Diameter 90 degree elbow dryer connector is made to connect a semi rigid or flexible dryer hose with no hose clamps necessary.
More information #ad
The service life of stv-90 will definitely be longer than any other duct clamp! About service : the product stv-90 dryer duct connector supports 30 days return and exchange. Our company attaches great importance to the shopping experience of each customer. Save your money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. H x 4. 25 in. L x 6 in. If you have any questions during shopping, please contact customer service in time. This means your clothes get dryer faster and you save electricity bills.
| Brand | Beaquicy #ad |
| Manufacturer | Beaquicy #ad |
| Part Number | STV-90 |
More information #ad
