RB Components 2495-S L Track End Cap, Black

#ad
RB Components B0168K1H5C #ad - Complete the finished look of your angled L-track with our protective end caps, made of durable and impact resistant H. D. P. E. Use with kinedyne #fe752-01-PD4 Angled L-Track. The end caps may not work with other manufacturer's or brands of angled L-track. Made of durable, impact Resistant H. D. P. E. Sold in sets of 2.

Screw type and size is dictated by mounting substrate. These end caps were designed for use with Kinedyne LLC L-track # FE752-01-PD4. Mounting screws for end caps are not included with this set. Sold in sets of 2.

#ad



Aluminum Track Fitting 4,000 lb Capacity w/Aluminum Keeper, Tiedowns 12-Pack

#ad
Fittings for Aluminum Track-Multi Packs 40890-03-12 #ad - We refer to the track as aluminum load track. Requires the W. L. L. The steel stud/center post is zinc plated to inhibit corrosion. It is spring loaded to permit simple attach and detach operation. To be 1/3 of the Rated Capacity. The fitting is spring loaded to permit simple attach and detach operation. Capacity. This listing is for twelve 12 single stud fittings with a rated capacity* of 4, 166 lb.

To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward. Single stud refers to the number of "fingers" that it captures when attached to the aluminum track. The maximum load weight a tie-down should be subjected to during normal use.

Aluminum Track Fitting 4,000 lb Capacity w/Aluminum Keeper, Tiedowns 12-Pack #ad - To assist in making the proper tie-down choice the Federal D. O. T. The base measures 1-3/8" long x 3/4" wide with a 3/16" diameter stainless steel ring that measures 1-3/8" on center. The fittings' aluminum base and stainless steel ring will not rust. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

#ad



6 Foot Aluminum L-Track

#ad
US Cargo Control #ad - Height: 1/2". Requires the W. L. L. Aluminum: Grade 6351. The W. L. L. Working load limit is a 2, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. It is also commonly referred to as airplane track, 000 lbs.

Capacity. To attach, rest the fitting in the load track, then push down on the base and push forward. Single stud refers to the number of "fingers" that it captures when attached to the aluminum track. To be 1/3 of the Rated Capacity. The fitting is spring loaded to permit simple attach and detach operation. We refer to the track as aluminum load track.

6 Foot Aluminum L-Track #ad - To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. Width:1-3/8". The steel stud/center post is zinc plated to inhibit corrosion. Length: 6'. The maximum load weight a tie-down should be subjected to during normal use. Also available in a 12 foot length: 12' Aircraft Style Seat / Airline Track.

#ad



For Flatbed, Truck, Cargo, Van, Enclosed Trailer - Automotive Accessories- 5 Year Warranty- Black - Adjustable - Heavy Aircraft Quality Aluminum - Pit Posse 4' Aluminum S Track Tie Down Rails Set Of 2

#ad
Pit Posse #ad - This fitting fits all aluminum track that is similar to the track shown in the secondary image above. The base measures 1-3/8" long x 3/4" wide with a 3/16" diameter stainless steel ring that measures 1-3/8" on center. The fittings' aluminum base and stainless steel ring will not rust. Requires the W. L. L. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases.

Made of heavy-duty aircraft quality aluminum, won't bend under pressure. Stylish-the black rails will look great anywhere. Number of holes per track: 18. To attach, rest the fitting in the load track, then push down on the base and push forward. Single stud refers to the number of "fingers" that it captures when attached to the aluminum track.

For Flatbed, Truck, Cargo, Van, Enclosed Trailer - Automotive Accessories- 5 Year Warranty- Black - Adjustable - Heavy Aircraft Quality Aluminum - Pit Posse 4' Aluminum S Track Tie Down Rails Set Of 2 #ad - Width:1-3/8". It is also commonly referred to as airplane track, 000 lbs. To be 1/3 of the Rated Capacity. The fitting is spring loaded to permit simple attach and detach operation. Aluminum: Grade 6351. To assist in making the proper tie-down choice the Federal D.

#ad



L-TRACK POWER SPORT TIE DOWN KIT 8 INCH Angled, Pre-Drilled

#ad
Cargo Equipment Corp. #ad - The maximum load weight a tie-down should be subjected to during normal use. We refer to the track as aluminum load track. This listing is for twelve 12 single stud fittings with a rated capacity* of 4, 166 lb. W. L. L. Made of heavy-duty aircraft quality aluminum, won't bend under pressure. This fitting fits all aluminum track that is similar to the track shown in the secondary image above.

The W. L. L. Working load limit is a 2, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases.

L-TRACK POWER SPORT TIE DOWN KIT 8 INCH Angled, Pre-Drilled #ad - Width:1-3/8". Working load limit of 2, 000 lbs. Pre-drilled track can be quickly and easily installed on the trailer floor. Qty 4 of the single stud fittings with round ring available for securing into L track. Stylish-the black rails will look great anywhere. Number of holes per track: 18.

#ad



Cargo Equipment Corp. Single Stud L-Track Fitting with Round Ring 10Pack

#ad
Cargo Equipment Corp. #ad - The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D. O. T. Made of heavy-duty aircraft quality aluminum, won't bend under pressure. Aluminum: Grade 6351. Easy to install -mounts to wood and metal easily. Qty 4 pieces of track made of aluminum alloy 6061-T6.

The base measures 1-3/8" long x 3/4" wide with a 3/16" diameter stainless steel ring that measures 1-3/8" on center. The fittings' aluminum base and stainless steel ring will not rust. The W. L. L. Working load limit is a 2, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

Cargo Equipment Corp. Single Stud L-Track Fitting with Round Ring 10Pack #ad - Working load limit of 2, 000 lbs. Pre-drilled track can be quickly and easily installed on the trailer floor. Qty 4 of the single stud fittings with round ring available for securing into L track. To attach, rest the fitting in the load track, then push down on the base and push forward.

#ad



10 Pack of L-Track Threaded Stud Fitting

#ad
Cargo Equipment Corp. #ad - Capacity. To attach, rest the fitting in the load track, then push down on the base and push forward. Single stud refers to the number of "fingers" that it captures when attached to the aluminum track. To be 1/3 of the Rated Capacity. The fitting is spring loaded to permit simple attach and detach operation. Easy to install -mounts to wood and metal easily.

This l track threaded stud fitting is used as a bolt-on anchoring point for L Track. Working load limit of 2, 000 lbs. Pre-drilled track can be quickly and easily installed on the trailer floor. Qty 4 of the single stud fittings with round ring available for securing into L track. Used for mounting Seats or many other items to L-Track.

10 Pack of L-Track Threaded Stud Fitting #ad - To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. Number of holes per track: 18. Qty 4 pieces of track made of aluminum alloy 6061-T6. Aluminum: Grade 6351. The maximum load weight a tie-down should be subjected to during normal use. The base measures 1-3/8" long x 3/4" wide with a 3/16" diameter stainless steel ring that measures 1-3/8" on center.

The fittings' aluminum base and stainless steel ring will not rust.

#ad



CYC 5002, Single Stud Fitting with O-Ring, Application for Logistic Installation and L-Track Uses 6-Pack

#ad
CYC CYC 5002 #ad - W. L. L. Aluminum: Grade 6351. To be 1/3 of the Rated Capacity. The fitting is spring loaded to permit simple attach and detach operation. For logistic track Installation and L-Track Uses. Finish: anodized Body with Stainless Steel O-Ring. To assist in making the proper tie-down choice the Federal D. O. T. The base measures 1-3/8" long x 3/4" wide with a 3/16" diameter stainless steel ring that measures 1-3/8" on center.

The fittings' aluminum base and stainless steel ring will not rust. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. Single stud fitting breaking strength: 1300 kg finish: anodized body with Stainless Steel O-Ring For L-Track Use Quantity: 6 Pack This listing is for twelve 12 single stud fittings with a rated capacity* of 4, 166 lb.

CYC 5002, Single Stud Fitting with O-Ring, Application for Logistic Installation and L-Track Uses 6-Pack #ad - Capacity. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. The W. L. L. Working load limit is a 2, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

#ad



US Cargo Control 8 Piece Powersports Aluminum 4 Foot L Track Tie Down System

#ad
US Cargo Control COMINU002110 #ad - 4 - aluminum Single Stud Fittings. Made of heavy-duty aircraft quality aluminum, won't bend under pressure. Easy to install -mounts to wood and metal easily. Versatile-will fit all types of tiedowns like ratchet straps, D and O rings, buckets and bags, hooks, and shoring beams. Flexible, you can vary the configuration as needed while providing secure tie down.

Requires the W. L. L. It is also commonly referred to as airplane track, 000 lbs. The W. L. L. Working load limit is a 2, seat or simply S track. Rated capacity: also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new.

US Cargo Control 8 Piece Powersports Aluminum 4 Foot L Track Tie Down System #ad - To attach, rest the fitting in the load track, then push down on the base and push forward. Single stud refers to the number of "fingers" that it captures when attached to the aluminum track. Finish: anodized Body with Stainless Steel O-Ring. Fasteners not included; sold separately. Height: 1/2".

#ad



Pit Posse Pp2882 S Track Anchor Mounting Hardware Kit for Tie Down Rail Enclosed Cargo Trailer Van Truck

#ad
Pit Posse #ad - We refer to the track as aluminum load track. Width:1-3/8". This fitting fits all aluminum track that is similar to the track shown in the secondary image above. W. L. L. Number of holes per track: 18. Number of holes per track - 10 Height: 1/2". Easy to install -mounts to wood and metal easily. To assist in making the proper tie-down choice the Federal D.

O. T. Breaking strength: 1300 kg. Easy to install. The maximum load weight a tie-down should be subjected to during normal use. To be 1/3 of the Rated Capacity. The fitting is spring loaded to permit simple attach and detach operation. Working load limit of 2, 000 lbs. Pre-drilled track can be quickly and easily installed on the trailer floor.

Pit Posse Pp2882 S Track Anchor Mounting Hardware Kit for Tie Down Rail Enclosed Cargo Trailer Van Truck #ad - Qty 4 of the single stud fittings with round ring available for securing into L track. Used for mounting Seats or many other items to L-Track. 4 - aluminum Single Stud Fittings. Kit consists of 30 piece.

#ad



US Cargo Control 6 Piece Powersports Black 4 Foot L Track Tie Down System

#ad
US Cargo Control #ad - For logistic track Installation and L-Track Uses. Great for tying down and securing motorcycles, dirt bikes, ATVs, etc.4 - 48" aluminum l-track Tie Down Rails. Height: 1/2". Kit consists of 30 piece. The steel stud/center post is zinc plated to inhibit corrosion. Length: 6'. Easy to install. Excellent Quality. Great for tying down and securing motorcycles, dirt bikes, ATVs, etc.

2 - 48" black l-track Tie Down Rails. Number of holes per track - 10 Mount track sections to trailer walls, etc this listing is for twelve 12 single stud fittings with a rated capacity* of 4, ATVs, floors and truck bed rail to create quick multiple tie down points to secure motorcycles, 166 lb. Easy to install -mounts to wood and metal easily.

US Cargo Control 6 Piece Powersports Black 4 Foot L Track Tie Down System #ad - This fitting fits all aluminum track that is similar to the track shown in the secondary image above. Working load limit: 1, 000 lbs / 453 kgs. Package Quantity: 1. Finish: anodized Body with Stainless Steel O-Ring. Single Stud fitting.

#ad