JL Safety Suction Cup with Magnet Charm Use on All Mirortag and Windshieldtag Placard Holders. 2 Included

#ad
JL Safety WTM25 #ad - 2 included in the sale. Use it anywhere on your windshield to hang any of our Mirortag or WinshieldTAG placard holders. Holder is not included. Suction cup and magnet only. Industrial grade suction cup with built in super strong magnet. Made in USA. Attach it wherever you like on your windshield. The charm is made from strong clear Polycarbonate material that tolerates high heat.

Use on mirortag and WindshieldTAG placard holders by JL Safety. This suction cup with a built in super strong magnet charm is an industrial grade with built in ring to divert sun rays from forming a focal point and causes damages to your car interior. The magnet is a super strong rare earth grade N45. Attach it wherever you like and far enough from the rearview mirror if it has a built-in compass.

JL Safety Suction Cup with Magnet Charm Use on All Mirortag and Windshieldtag Placard Holders. 2 Included #ad - Can also be used to hang on any glass to magnetically attach items to it. Easily snap on and off your permit placrad to the hanging magnet. Made in USA.

#ad



Windshield Tag by JL Safety. Handicap Placard Protective Holder with Suction Cup. Magnetically Display & Remove Tag

#ad
JL Safety WindshieldTAG Silver #ad - We recommend the windshield temperature to be at least 40F when applied. Holder only, placard is not included. Placard size: 10 x 4 inches. Windshieldtag wtd100 is another line of JL Safety innovative line of products added to our Visortag and Mirortag family of placard holders. For hard plastic version look for our WindshieldTAG Gold model WTD210

. The silver model comes with a Vinyl sleeve. Made in usa industrial grade suction cup with built in strong magnet. If mirror has a built in compass, make sure it is far enough from the mirror so compass reading is not affected. The suction cup can be installed behind the rearview mirror and can remain there unless you need to relocate it.

Windshield Tag by JL Safety. Handicap Placard Protective Holder with Suction Cup. Magnetically Display & Remove Tag #ad - To remove the suction cup, simply pull on the small tab and it will come off. Make sure the windshield surface and the suction cup are both clean before installation. Easily snap on and off your permit placrad to the hanging magnet. Comes with a protective sleeve, and a strong magnet that hangs from an industrial grade suction cup patented with an extra ring to divert light rays from forming a focal point and cause damages.

Protect your placard from wear and tear. All components are made and assembled in the USA. It fits any car since the rearview mirror is not used.

#ad



for multiple cars to use with JL Safety Mirortag holders for Handicapped Parking Placard. 2 included. - Magnet Charms by JL Safety

#ad
JL Safety COMINHKPR72258 #ad - Install in seconds. Holder only, placard is not included. Placard size: 10 x 4 inches. Protect your placard from wear and tear. Super strong magnet- works on all Mirortag models. Fits all mirror posts. Works on all Mirortag models. Attach it wherever you like on your windshield. Attach it and leave it. Tough clear sturdy plastic guaranteed to resist hot and cold conditions.

Made in USA. Made in usa industrial grade suction cup with built in strong magnet. Pacard is not included in sale. Will not bend, melt or break. Easily snap on and off your permit placrad to the hanging magnet. 2 included. Use one for each car and only transfer the holder between cars. Sale is for the 2 magnet charms only and placard is not included, and shown only to clarify how to use it.

for multiple cars to use with JL Safety Mirortag holders for Handicapped Parking Placard. 2 included. - Magnet Charms by JL Safety #ad - Many users have multiple cars and only one tag, so instead of removing the Magnet Charm from one car to another every time you drive a different car, you can buy extra Magnet Charms for as many cars as you have and hang one Charm in each car, and only transfer the tag holder between cars. Patent pending & Made in USA.

It is made from a clear heat resistant and durable plastic.

#ad



A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. Magnetically snap the holder On & Off to a Magnet Charm mounted behind rear view mirror. Fits ALL rearview mirror sizes. 2 Holders and 2 Magnet Charms included. Patent Pending & Made in USA - 2 MirorTag Charm by JL Safety

#ad
JL Safety #ad - Extra magnet Charms can be purchased separately for multiple cars. Pacard is not included in sale. Holder only, placard is not included. Placard size: 10 x 4 inches. Patent pending & Made in USA. Simply insert your tag into the plastic holder, attach and adjust the Magnet Charm to desired length on rearview mirror once.

Unlike all flimsy sheaths, it has a detachable sturdy Magnet Charm that is sun & cold-resistant and will not melt or break or we will replace it free. Holder will protect your placard from cracks, tears and creases. Will not bend, melt or break. Will not melt or break. Protect your placard from wear and tear.

A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. Magnetically snap the holder On & Off to a Magnet Charm mounted behind rear view mirror. Fits ALL rearview mirror sizes. 2 Holders and 2 Magnet Charms included. Patent Pending & Made in USA - 2 MirorTag Charm by JL Safety #ad - Attach it wherever you like on your windshield. Mirortag charm has a super strong magnet that keeps the placard and Magnet Charm held together. Industrial grade suction cup with built in strong magnet. Use one for each car and only transfer the holder between cars. Made in USA. When parked, move plastic holder close to Magnet Charm and the magnet will snap onto the metal plate of the holder to hold the placard in place.

#ad



MirorTag Silver by JL Safety- A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. Slip in your handicap tag into this thick holder that unlike others, this one comes with a detachable strong hook that will never melt or bend or break in the sun. Holder will MAGNETICALLY snap On & Off to a Hook you mount behind your rearview mirror once. Full protection, and ON and OFF in a snap. Tag size accepted is 4.125" max, and any length. Maximum mirror post diameter 1". Made in USA

#ad
JL Safety MTD100 #ad - Made in USA. Mirror post size: Fits ALL. Both versions share the same hook, with the plastic holder is thinner in the Silver model 18 mils vs the Gold that comes with a sturdier plastic 60 mils. Mirortag is designed to protect and preserve your tag. Placard size accepted: 4" w by 10" L. Easily snap on and off your permit placrad to the hanging magnet.

Made in USA. Will not bend, melt or break. It is illegal in all states to drive with your handicap tag hanging from the rearview mirror, but it is not easy to hang and remove the placard as required by law. Easy to transfer to another vehicle if needed. Extra hooks can be purchased seperatly for multiple cars.

MirorTag Silver by JL Safety- A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. Slip in your handicap tag into this thick holder that unlike others, this one comes with a detachable strong hook that will never melt or bend or break in the sun. Holder will MAGNETICALLY snap On & Off to a Hook you mount behind your rearview mirror once. Full protection, and ON and OFF in a snap. Tag size accepted is 4.125" max, and any length. Maximum mirror post diameter 1". Made in USA #ad - . Holder only, placard is not included. Placard size: 10 x 4 inches. Unlike all flimsy sheaths, protecting your placard from cracks, its sturdy hook is sun & cold-resistant, tears and creases. When parked, move plastic holder close to hook and the 2 magnets will snap together to hold the placard in place. Use one for each car and only transfer the holder between cars.

Before your drive, simply pull down the plastic holder to unlatch it from the hook.

#ad



Additional Hook for Multiple Cars to use Mirortag Holders for Handicapped Parking Placard - 2 Included - JL Safety Hook for MirorTag

#ad
JL Safety MHK200 #ad - Tough clear sturdy plastic guaranteed to resist hot and cold conditions. Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. No need to look for mirror post, snap it on with your eyes closed. Super strong magnet- works on all Mirortag models. Fits all mirror posts.

Easy to transfer to another vehicle if needed. Install in seconds. Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. No need to look for mirror post, snap your tag on with your eyes closed. Placard size: 4. 125" w, 10" l. Attach it wherever you like on your windshield.

Additional Hook for Multiple Cars to use Mirortag Holders for Handicapped Parking Placard - 2 Included - JL Safety Hook for MirorTag #ad - Easy to transfer to another vehicle if needed. Works on all Mirortag models- 2 hooks included. One holder and one hook included. Eliminates the need to remove the hook from one rearview mirror to another when changing cars. Polarized to work on all Mirortag models. Only transfer the handicapped tag holder between cars.

#ad



MirorTag Gold by JL Safety- A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. Hard plastic will not melt or bend or break in the sun. Magnetically snaps On & Off. Made in USA

#ad
JL Safety MTD210 #ad - Mirror post size: Fits ALL. Placard size accepted: 4" w by 10" L. Both versions share the same hook, with the plastic holder is thinner in the Silver model 18 mils vs the Gold that comes with a sturdier plastic 60 mils. Tag size accepted: 9. 25" long, 3. 5" wide. Mirortag has super strong magnets that keeps the placard and hook held together.

Will not bend, melt or break. Easy to transfer to another vehicle if needed. Made in USA. Mirortag is designed to protect and preserve your tag. Rearview mirror post: 1 inch maximum. Made in USA. Simply insert your tag into the plastic holder, place the hook on rearview mirror once. Hard, tough, sturdy plastic guaranteed to resist hot and cold conditions.

MirorTag Gold by JL Safety- A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. Hard plastic will not melt or bend or break in the sun. Magnetically snaps On & Off. Made in USA #ad - Extra hooks can be purchased seperately. Easily snap on and off your permit placrad to the hanging magnet. Install in seconds. Pacard is not included in sale. Mirortag is offered in 2 versions, MirorTag Silver and MirorTag Gold.

#ad



MirorTag Charm by JL Safety- A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. This Handicap Placard Holder comes with a detachable strong Magnet Charm that will never melt or bend or break in the sun. MAGNETICALLY snap On & Off your placard to a Magnet Charm you mount behind your rearview mirror once. Full protection, and ON and OFF in a snap. Maximum Tag size is 4.125" W by 10" L. Fits all mirror posts. Made in USA

#ad
JL Safety #ad - Will not melt or break. Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. No need to look for mirror post, snap it on with your eyes closed. Protects and preserves the condition of your parking placard permit forever. Mirortag is designed to protect and preserve your tag.

Before you drive, simply pull down the plastic holder to unlatch it from the Magnet Charm. Pacard is not included in sale. Easy to transfer to another vehicle if needed. Install in seconds. Made in USA. Super strong magnet- works on all Mirortag models. Fits all mirror posts. Tough clear sturdy plastic guaranteed to resist hot and cold conditions.

MirorTag Charm by JL Safety- A Novel Way to Protect, Display & Put Away a Handicapped Parking Placard. This Handicap Placard Holder comes with a detachable strong Magnet Charm that will never melt or bend or break in the sun. MAGNETICALLY snap On & Off your placard to a Magnet Charm you mount behind your rearview mirror once. Full protection, and ON and OFF in a snap. Maximum Tag size is 4.125" W by 10" L. Fits all mirror posts. Made in USA #ad - Will not bend, melt or break. Tag size: 4. 125" w by 10" l. Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. No need to look for mirror post, snap it on with your eyes closed. Made in USA.

#ad



Durable Vertical Parking Lot Pass Rear View Mirror Hanger - for Car or Truck by Specialist ID, 1 Sold Individually - Clear Parking Permit Holder - For SMALL Stickers and Passes

#ad
Specialist ID SPID-VHV #ad - This parking pass holder fits any credential or pass that is 3 1/8" High X 2 3/4" Wide. Great for parking garage prox / tap card - easy access to your Building, GYM, or Community or Office. Attach it and leave it. Tough clear sturdy plastic guaranteed to resist hot and cold conditions. Super strong magnet- works on all Mirortag models.

Fits all mirror posts. Easy to transfer to another vehicle if needed. Store registration inside holder. Easy to transfer to another vehicle if needed. Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. No need to look for mirror post, snap it on with your eyes closed.

Durable Vertical Parking Lot Pass Rear View Mirror Hanger - for Car or Truck by Specialist ID, 1 Sold Individually - Clear Parking Permit Holder - For SMALL Stickers and Passes #ad - Protects and preserves the condition of your parking placard permit forever. Tough clear sturdy plastic guaranteed to resist hot and cold conditions. Pacard is not included in sale. Made in USA. Tough sturdy magnet Charm. Made in USA. Does not fit handicap passes - this small Parking Permit Holder Can Fit up to 2 3/4" by 3 1/8".

#ad



JL Safety 2 MirorTag Silver Easily Display & Put Away a Handicapped Parking Placard. Strong Hook high Heat Rated. Magnetically snap The Holder On & Off. Post Diameter 1". 2 Included. Made in USA

#ad
JL Safety MTD100 #ad - Easy to transfer to another vehicle if needed. Easy to transfer to another vehicle if needed. Holders & hooks only, placard not included. Made in USA. Keep your pass in your car and an Arms Length Away Wherever You Go. Sale is for holders and hooks only and placard is not included, and shown only to clarify how to use it.

Warning: rearview mirror built-in compass operation may be affected by the magnet in some car models. Placard size accepted: 4" w by 10" L. Will not bend, melt or break. Patent pending and Made in USA. Holder will protect your placard from cracks, tears and creases. Simply insert your tag into the plastic holder, place the hook on rearview mirror once.

JL Safety 2 MirorTag Silver Easily Display & Put Away a Handicapped Parking Placard. Strong Hook high Heat Rated. Magnetically snap The Holder On & Off. Post Diameter 1". 2 Included. Made in USA #ad - Tough clear sturdy plastic guaranteed to resist hot and cold conditions. Hard, tough, sturdy plastic guaranteed to resist hot and cold conditions. Before your drive, simply pull down the plastic holder to unlatch it from the hook. It is illegal in all states to drive with your handicap tag hanging from the rearview mirror, but it is not easy to hang and remove the placard as required by law.

Mirortag silver has a super strong magnet that keeps the placard and hook held together. Mirror post size: 1 inch maximum.

#ad



Disabled Parking Placard Protector Hanger Sleeve with Large Hook- Pack of 2 Plastic Mirror Tag Hang - LotFancy Handicap Parking Permit Holder Cover

#ad
LotFancy #ad - We are making the most suitable universal sizes to fit all states. Please do understand if the protector may have extra room for your parking permit. Tag size: 4. 125" w by 10" l. Eliminates the pain & frustration to hang and remove the tag from the rearview mirror every time you park and drive. No need to look for mirror post, snap it on with your eyes closed.

Protects and preserves the condition of your parking placard permit forever. Pacard is not included in sale. Use one for each car and only transfer the holder between cars. Will not melt or break under any heat. Will not bend, melt or break. Easy to transfer to another vehicle if needed. Holder only, placard is not included.

Disabled Parking Placard Protector Hanger Sleeve with Large Hook- Pack of 2 Plastic Mirror Tag Hang - LotFancy Handicap Parking Permit Holder Cover #ad - Placard size: 10 x 4 inches. Ultra-transparent plastic holder keeps your parking permit clearly visible * Universal size to fit disable parking permit hangtag of all states * Large sturdy bulit-in hanger allows for easy display, put away or transfer the placard holder About the Upgraded Handicap Placard Holder Size: 5" W by 10

6" l rearview mirror post: 1 inch maximum Hook height: 2. 36 inches industrial grade suction cup with built in strong magnet. Store registration inside holder.

#ad