Big Horn 19138 1/4-Inch Self-Centering Bit For Use with Pin Jig

#ad
Big Horn 19138 #ad - Use standard 1/4-Inch hex shank. Bit easily removes for sharpening. Use for precise placement of shelf pins. Use to drill 1/4-Inch holes. Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes.

#ad



PRO SHELF DRILLING JIG

#ad
ROCKLER #ad - Eliminate the possibility of misaligned shelves and cut your setup time in half with the easy-to-use Pro Shelf Drilling Jig! Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows. Guarantees each row is perfectly in line spaces each hole exactly 37mm from the edge of your stock jig is easy to set up and easy to adjust for multiple rowslooking for a faster, easier, and accurate way to set up the holes for your cabinet shelves? add the pro shelf drilling jig to your resources and eliminate the possibility of rocky shelves!Features/Benefits:Rows are spaced exactly 1-1/4 32mm apart Pin holes are set back exactly 1-7/16 37mm from each edge 32mm spacing and 37mm setback are fully compatible with the Euro hinge system 24 long twin template tracks are joined by rigid rails that lock in place for error-free drilling Drill two rows with one jig to save time and ensure accuracy Works with 2 bit sizes: 1/4 and 5mm for shelf pins Locking 3-star tracking knobs allow for adjustments and ensure the jig stays firmly in place Reversible guide rails have a smooth aluminum surface on one side and a rubber fence on the other for better gripping power Includes two 5mm and two 1/4 indexing pins that eliminate the need for clamps and allow you to extend long rows of holes indefinitely Included indexing pins store conveniently in the ends of each guide rail when not in use Drilling template is made of thick acrylic for durabilityDesigned for u.

#ad



Big Horn 19139 5mm Self-Centering Bit For Use with Pin Jig

#ad
Big Horn 19139 #ad - Bit easily removes for sharpening. Use standard 1/4-Inch hex shank. Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes. Use to drill 5mm holes. Use for precise placement of shelf pins.

#ad



100 Pack - Rok Hardware Heavy Duty 1/4" Shelf Pins/Pegs, Flat Spoon Style, Nickel

#ad
Rok VC0S2_ROKSP14N #ad - Nickel finish for a stylish look. Rok hardware provides products with quality that can be both seen and felt. Bit easily removes for sharpening. Use for precise placement of shelf pins. Additional sizes and colors available. Use standard 1/4-Inch hex shank. Rok hardware 1/4" shelf Pins, Flat Spoon Style, Nickel. These shelf pins provide a classy look to your shelves.

100 Pack - Rok Hardware Heavy Duty 1/4" Shelf Pins/Pegs, Flat Spoon Style, Nickel #ad - Official rok / Rok Hardware product. Use to drill 5mm holes. 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes. The shelf support pegs fit 1/4" shelf holes on cabinets, entertainment centers, bookcases, and more. Shelf pins install easily by hand! Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes.

#ad



Pioneer 0946998-50 1/4" Nickel Shelf Pin Bag of 50

#ad
Pioneer FBA_0946998-50 #ad - Use standard 1/4-Inch hex shank. Additional sizes and colors available. Nickel finish for a stylish look. 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes. The shelf support pegs fit 1/4" shelf holes on cabinets, bookcases, entertainment centers, and more. Shelf pins install easily by hand!

Use to drill 5mm holes. Bit easily removes for sharpening. Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes. Official rok / Rok Hardware product. 1/4" spoon shelf support nickel pin length 3/8" Shelf Rest 3/8" wide X 1/2" long Use for precise placement of shelf pins.

#ad



Eagle America 401-1220 Deluxe Shelf Pin Jig

#ad
Eagle America 401-1220 #ad - 1/4inch and 5mm bits included. 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes. The shelf support pegs fit 1/4" shelf holes on cabinets, entertainment centers, bookcases, and more. Shelf pins install easily by hand! Use for precise placement of shelf pins. Bit easily removes for sharpening.

Package includes: one 1/4" self-centering drill bit one 5mm self-centering drill Bit TWO Shelf Pin Star Indexing Pins TWO T-Track Guide Rails TWO Clear Acrylic Shelf Pin Templates with Edge Guides. Additional sizes and colors available. The deluxe shelf pin jig also provides perfect vertical spacing of 1-1/4" 32mm between pin holes.

Eagle America 401-1220 Deluxe Shelf Pin Jig #ad - The deluxe shelf pin jig is a dual drilling jig that allows you to drill two rows of shelf pin holes that are perfectly aligned! This eliminates that chance for rocking or wobbling shelves. The jig also features a 50mm index from opposite side of the jig for larger or wider shelves. Official rok / Rok Hardware product.

. Each pin can index either 1/4" pin holes or 5mm pin holes both the 1/4" & 5mm self centering bits are included. Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes. The ez-align shelf pin jig is the perfect for those who want to get it done right the first time.

#ad



Rockler Universal Drawer Slide Jig

#ad
Woodworking and Hardware #ad - Bit easily removes for sharpening. Use standard 1/4-Inch hex shank. 0 Use for precise placement of shelf pins. Additional sizes and colors available. Perfectly Aligned Shelves. Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback. 1/4inch and 5mm bits included.

Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes. Nickel finish for a stylish look. The jig can be clamped in place if desired, and it also features an adjustable rod that references off of the face frame rails or cabinet bottom for fast, repeatable height settings.

Rockler Universal Drawer Slide Jig #ad - Features:sliding wedge locks slide securely into the jigadjustable indexing foot allows perfect repeatabilityFoot can be rotated for use on top or bottomCutouts in jig allow access for drill and driver bitsLarge clamping area so jig can be clamped in placeDurable foamed nylon body with steel indexing rod and ABS footIndexing rod is stored onboard when not in useNot compatible with Blum Tandem Drawer Slides.

Note: the maximum drawer slide height that this jig can accommodate is 1-3/4 inch. 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes. The shelf support pegs fit 1/4" shelf holes on cabinets, bookcases, entertainment centers, and more. Shelf pins install easily by hand!

#ad



Big Horn 19651 Shelf Pin Drilling Jig

#ad
Big Horn 19651 #ad - Use to drill 5mm holes. Use for precise placement of shelf pins. Nickel finish for a stylish look. Self-centering bits bore to a consistent depth every time. Use standard 1/4-Inch hex shank. Official rok / Rok Hardware product. Perfectly Aligned Shelves. Bit easily removes for sharpening. 0 Achieve consistently spaced and centered shelf-pin holes.

Big Horn 19651 Shelf Pin Drilling Jig #ad - No wobbly Shelves. Handle mounts to either side of the template for two different setback options. Clear template features laser-cut accuracy. Works with four different bit sizes for shelf pins or pin sleeves. Additional sizes and colors available. 1/4inch and 5mm bits included. 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes.

The shelf support pegs fit 1/4" shelf holes on cabinets, bookcases, entertainment centers, and more. Shelf pins install easily by hand! Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes.

#ad



Shelf Support, Bracket-Style, Nickel, 1/4" 100

#ad
Hafele #ad - Handle mounts to either side of the template for two different setback options. Bit easily removes for sharpening. Use standard 1/4-Inch hex shank. Self-centering bits bore to a consistent depth every time. 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes. The shelf support pegs fit 1/4" shelf holes on cabinets, entertainment centers, bookcases, and more.

Shelf pins install easily by hand!1/4inch and 5mm bits included. Use to drill 5mm holes. Shelf support, nickel, bracket-Style, 1/4" 100 Use for precise placement of shelf pins. Additional sizes and colors available. Achieve consistently spaced and centered shelf-pin holes. Official rok / Rok Hardware product. No wobbly Shelves.

Shelf Support, Bracket-Style, Nickel, 1/4" 100 #ad - Nickel finish for a stylish look. Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes. Works with four different bit sizes for shelf pins or pin sleeves. Perfectly Aligned Shelves. Clear template features laser-cut accuracy.

#ad



Woodhaven 781 Inch Shelf Pin Jig

#ad
Woodhaven #ad - Bit easily removes for sharpening. Routing is faster and produces a slightly cleaner/squarer hole on unassembled parts. Jig accepts 3/8" od self-centering drills order separately, or a guide bushing & router bit order separately. Made of tough 1/4" thick phenolic. This jigs compact size lets you use it in the tightest quarters.

Lets you rout or drill either 5mm or 1/4" shelf pin holes. Official rok / Rok Hardware product. Can be used with big horn 19651 pin Jig and Bit sold separately or other templates with 3/8-Inch guide holes. Get our 5mm 761n nickel or 1/4" 762B brass shelf pins to finish the job. Lifetime guarantee against defects in material or workmanship.

Woodhaven 781 Inch Shelf Pin Jig #ad - Clear template features laser-cut accuracy. 0 Woodhaven 781 inch shelf Pin Jig Use for precise placement of shelf pins. Perfectly Aligned Shelves. Handle mounts to either side of the template for two different setback options. Self-centering bits bore to a consistent depth every time. 781 has 15 holes spaced 1" on center and 1-1/2" from the edge.

#ad



SOTOGO 120 Count Shelf Pins 5mm Spoon Shape Cabinet Furniture Shelf Support Pegs Nickel Plated

#ad
SOTOGO #ad - Routing is faster and produces a slightly cleaner/squarer hole on unassembled parts. Jig accepts 3/8" od self-centering drills order separately, or a guide bushing & router bit order separately. Made of tough 1/4" thick phenolic. Use to drill 5mm holes. No wobbly Shelves. Bit easily removes for sharpening. Additional sizes and colors available.

781 has 15 holes spaced 1" on center and 1-1/2" from the edge. Get our 5mm 761n nickel or 1/4" 762B brass shelf pins to finish the job. Lifetime guarantee against defects in material or workmanship. Self-centering bits bore to a consistent depth every time. 1/4inch and 5mm bits included. Quantity - comes with 120 pcs shelf pins and a plastic box for storage.

SOTOGO 120 Count Shelf Pins 5mm Spoon Shape Cabinet Furniture Shelf Support Pegs Nickel Plated #ad - 1/4" nickel shelf pins are used to support a shelf in place on any project with 1/4" shelf holes. The shelf support pegs fit 1/4" shelf holes on cabinets, entertainment centers, bookcases, and more. Shelf pins install easily by hand! Official rok / Rok Hardware product. Used for-5mm shelf holes on cabinets, entertainment centers, bookcases, and more.

#ad